Edifier R1850DB Black

Edifier R1850DB BlackКолонки<br>Black, 66W, Bluetooth<br>Колонки
Black, 66W, Bluetooth


Подробнее >>>










Влажный корм для кошек Animonda Rafine Soupe Adult пауч

Влажный корм для кошек Animonda Rafine Soupe Adult пауч Консервы повседневные<br><br><br>Вкус: с говядиной<br>Размер животного: всех пород<br>Возраст: для взрослых<br>Упаковка: пауч<br>Вид животного: для кошекКонсервы повседневные


Вкус: с говядиной
Размер животного: всех пород
Возраст: для взрослых
Упаковка: пауч
Вид животного: для кошек

Подробнее >>>









F20 Intelligent 3D Pen·? Smart Printing Drawing Pen Speed Control - Green (EU Plug)

F20 Intelligent 3D Pen·? Smart Printing Drawing Pen Speed Control - Green (EU Plug) 3D Printer & Supplies<br>Brand: Other<br><br><br><br><br><br> <br> <br>Basic Information<br>  n.g.   45g   <br>  ABS temperature   180-210?  <br>  PLA/WOOD temperature  160-180? <br>  Supported material  1.75mm PLA/WOOD/ABS   <br>  Input rated power for adapter   100/250V 3A   <br>  Output rated power of device  DC12V 3A 36W  <br>  Nozzle   0.4 mm   <br>  Interested groups   Painters, product designers , hobbyists , children, students, etc.   <br>Product Details <br>  Size   170x 20 x25mm   <br>  Weight    48 g   <br> Bundle Accessories <br>1* 3D pen<br>1* Wall Charger<br>1* Pen holder<br>1* Use Manual<br>3* PLA Filament <br> <br><br>Features of Fourth Generation 3D Pen<br>- The lightest 3D pen than before.<br>- Intelligent control, even hobbyist can draw freely.<br>- Nozzle with smart temperature sensing and heating, the first initiative in globe.<br>- 8 digital speed controls for more accurate and stable extruding.<br>- A single press for continuous extruding flow for more ease of doodling.<br>- Embedded nozzle, more convenient maintenance.<br>- Patented nozzle, lower temperature in tip.<br>Warning<br>1.Heat and burn hazard, the tip of the pen can be heated and burn hazard .In operation or within a short time after stop using, please do not touch the tip or surrounding area. <br>2.Please warn the others around the operator do not touch the pen due to hazard heating. <br>3.When not in use, please unload the material, unplug power socket, put the device in the pen holder, if direct contact, the hot tip of nozzle will damage the painted surfaces, plastic, clothes and etc.<br>4.Don not use the pen near bathtubs, showers, basins or other places wet with water, which will result in death due to electric shock.<br>5.This is sophisticated goods, which is only allowed to use filaments originally from us. Mis-use the device or mis-choose the heated temperature, or use consumables not originally from us, all these actions will result in breakdown of the device or cause harm to the user and void the quality warranty. The harm caused to the use includes but not limited: inhaling which is not properly heated or burn the flammable material.<br>The device is suitable for children over 8 years old and adults, children must be accompanied and monitored by adult when using the pen.<br>Product Overview<br><br><br>Operation rules<br>Step1: plug the power supply<br>Connect the adapter with the power source, then insert the end of the wire of the adapter into the power source hole of the 3D pen, the LED light is yellow, indicates the device is conductive and enter the mode of standby.<br>Step2: material/filament selection<br>Following step1,LED screen displays PLA or ABS, press the material/temperature button for the choice of material, it must be the material used actually, to avoid potential breakdown.(remark: the device can extrude wood filament, working at PLA mode).<br>Step 3: pre-heating<br>After selecting the material, press feeding button, LED light is red, indicates entering pre-heating mode in which LED screen displays real-time heating temperature .when LED turn to green from red, indicating the end of pre-heating process, then you can start to doodle with the pen.(it takes about 30 seconds to pre-heat)<br>Step4: selection of extruding speed<br>Press speed control button to choice best suited extruding speed.(remark: up to 8 speed controls, the default one will be 5 setting, 8 is fastest.processing speed button is only working when stop extruding and LED light is green, in other circumstances the processing will be in vain.<br>Step5: filament loading<br>Insert the selected material into feeding hole at the end of the pen, press feeding button and the filament will be moved by the built-in motor. When the melted  material come out of the tip, it means the success of setting, you can start to doodle now.<br>Step6: creating your artwork<br>The device designed with 8 speed controls, please select a proper extruding flow before you doodle. Different color of the same type of filament has different melting points. Please minor adjust the temperature in time according to the extruding status. (relationship between melting point of material and temperature adjustment, please follow temperature minor adjustment statement)<br>Step 7: New extruding flow function<br>The device combines functions of continuous extruding and intermittent extruding. continuous extruding: press feeding button, the pen extrude and flow constantly, press again feeding button, the pen stop feeding, the pen will stop feeding and extruding automatically when continuous feeding is in function for up to 8 minutes. Intermittent extruding: double click feeding button and hold on the button then the pen start to extrude, release the button, extruding stop.<br>Step8: change/unload material<br>When LED light is green, press and hold on the unload button for 3 seconds, then release, built-in motor will start to reverse material. When material stop moving backward, please take out the material gently from the end of the pen, then press unload button, the motor stop reversing.(intermittent function will automatically stop when work up to 1 minute)<br>Step9: finish the works<br>When the drawing ended, please unload all the filament to avoid negative influence on normal use of the device in the future.(remark: the device is sturdy and awesome device, but just like all mechanical tools, it needs a break after one hour of continuous use, to prolong its life span.)<br>Attention to the end of filament<br><br><br>Surface of end of filament must be flat and the section of end of the filament must be flat as well, both are better to be vertical with the length direction.<br>Troubleshooting<br>In use, when there is problem as below, please follow below instructions for fixing up, if no solution yet, please contact the seller directly.<br> 3D Printer & Supplies
Brand: Other







Basic Information
n.g. 45g
ABS temperature 180-210?
PLA/WOOD temperature 160-180?
Supported material 1.75mm PLA/WOOD/ABS
Input rated power for adapter  100/250V 3A
Output rated power of device DC12V 3A 36W
Nozzle 0.4 mm
Interested groups Painters, product designers , hobbyists , children, students, etc.
Product Details
Size 170x 20 x25mm
Weight 48 g
Bundle Accessories
1* 3D pen
1* Wall Charger
1* Pen holder
1* Use Manual
3* PLA Filament


Features of Fourth Generation 3D Pen
- The lightest 3D pen than before.
- Intelligent control, even hobbyist can draw freely.
- Nozzle with smart temperature sensing and heating, the first initiative in globe.
- 8 digital speed controls for more accurate and stable extruding.
- A single press for continuous extruding flow for more ease of doodling.
- Embedded nozzle, more convenient maintenance.
- Patented nozzle, lower temperature in tip.
Warning
1.Heat and burn hazard, the tip of the pen can be heated and burn hazard .In operation or within a short time after stop using, please do not touch the tip or surrounding area.
2.Please warn the others around the operator do not touch the pen due to hazard heating.
3.When not in use, please unload the material, unplug power socket, put the device in the pen holder, if direct contact, the hot tip of nozzle will damage the painted surfaces, plastic, clothes and etc.
4.Don not use the pen near bathtubs, showers, basins or other places wet with water, which will result in death due to electric shock.
5.This is sophisticated goods, which is only allowed to use filaments originally from us. Mis-use the device or mis-choose the heated temperature, or use consumables not originally from us, all these actions will result in breakdown of the device or cause harm to the user and void the quality warranty. The harm caused to the use includes but not limited: inhaling which is not properly heated or burn the flammable material.
The device is suitable for children over 8 years old and adults, children must be accompanied and monitored by adult when using the pen.
Product Overview


Operation rules
Step1: plug the power supply
Connect the adapter with the power source, then insert the end of the wire of the adapter into the power source hole of the 3D pen, the LED light is yellow, indicates the device is conductive and enter the mode of standby.
Step2: material/filament selection
Following step1,LED screen displays "PLA" or "ABS", press the "material/temperature button" for the choice of material, it must be the material used actually, to avoid potential breakdown.(remark: the device can extrude wood filament, working at "PLA" mode).
Step 3: pre-heating
After selecting the material, press feeding button, LED light is red, indicates entering pre-heating mode in which LED screen displays real-time heating temperature .when LED turn to green from red, indicating the end of pre-heating process, then you can start to doodle with the pen.(it takes about 30 seconds to pre-heat)
Step4: selection of extruding speed
Press speed control button to choice best suited extruding speed.(remark: up to 8 speed controls, the default one will be 5 setting, 8 is fastest.processing speed button is only working when stop extruding and LED light is green, in other circumstances the processing will be in vain.
Step5: filament loading
Insert the selected material into feeding hole at the end of the pen, press feeding button and the filament will be moved by the built-in motor. When the melted material come out of the tip, it means the success of setting, you can start to doodle now.
Step6: creating your artwork
The device designed with 8 speed controls, please select a proper extruding flow before you doodle. Different color of the same type of filament has different melting points. Please minor adjust the temperature in time according to the extruding status. (relationship between melting point of material and temperature adjustment, please follow" temperature minor adjustment statement")
Step 7: New extruding flow function
The device combines functions of continuous extruding and intermittent extruding. continuous extruding: press feeding button, the pen extrude and flow constantly, press again feeding button, the pen stop feeding, the pen will stop feeding and extruding automatically when continuous feeding is in function for up to 8 minutes. Intermittent extruding: double click feeding button and hold on the button then the pen start to extrude, release the button, extruding stop.
Step8: change/unload material
When LED light is green, press and hold on the unload button for 3 seconds, then release, built-in motor will start to reverse material. When material stop moving backward, please take out the material gently from the end of the pen, then press unload button, the motor stop reversing.(intermittent function will automatically stop when work up to 1 minute)
Step9: finish the works
When the drawing ended, please unload all the filament to avoid negative influence on normal use of the device in the future.(remark: the device is sturdy and awesome device, but just like all mechanical tools, it needs a break after one hour of continuous use, to prolong its life span.)
Attention to the end of filament


Surface of end of filament must be flat and the section of end of the filament must be flat as well, both are better to be vertical with the length direction.
Troubleshooting
In use, when there is problem as below, please follow below instructions for fixing up, if no solution yet, please contact the seller directly.


Подробнее >>>

Тайга, Жигулёвск, Звенигород, Саров, Бутурлиновка, Самара Шмидта.